[Aleozzy]

I have standing water in my kitchen sink and the washing machine drain pipe. If I plunge the sink, the washing machine drain pipe water level rises. All bathrooms sinks, showers and toilets are fine. I used a 50 ft snake in the washing machine drain pipe. The whole thing went in and nothing happened. Still clogged. Does anyone have any suggestions? Thanks.

[ma0641]

You may have gone up the vent. Try from the p trap at the sink.

[Aleozzy]

It went down. The washing machine drain goes out the house and meets with the vent just on the other side of the wall. I removed the vent pipe and inserted the 50 ft snake.
I will Also try at the sink.

[speedball1]

Are you on city sewer or a septic tank? Back to you, Tom

[Aleozzy]

City sewer. I also inserted the snake through the kitchen sink this morning and all 50 ft went in. I'm trying to solve the problem myself to save sone money, but I might need to call a professional. I also smell a bit of sewer outside. I could be just pay logical. Any more suggestions? Thank you so much.

Are you on city sewer or a septic tank? Back to you, Tom

[speedball1]

I also inserted the snake through the kitchen sink this morning and all 50 ft went in.

argue snaking from a roof vent? Back to you, Tom

[Aleozzy]

That's the weird part. I did snake the vent as well. Any other holes I should check?

argue snaking from a roof vent? Back to you, Tom