Ask Experts Questions for FREE Help !
Ask
    dfusi's Avatar
    dfusi Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2013, 01:58 AM
    I have a toro with a intek 500 in it the conrod bolts came loose and locked up
    Toro with a briggs and stratton intek 500 in it the conrod came loose so I pulled it apart and replaced the conrod I aligned the timing dots together I think this is right but it seems to be blowing out the fuel at the carby. Should these be opposite each other or facing each other?? The engine won't fire but if I hold my hand on the intake it backfires...
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Oct 12, 2013, 06:07 PM
    Hi,
    Sounds like something is not lined up correctly. The gear on the crank usually has a dot, but the cam gear usually has a scooped out place these days.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dawson's Delivery Service purchased equipment for $2,500. The Company $500 in cash an [ 1 Answers ]

Dawson's Delivery Service purchased equipment for $2,500. The Company $500 in cash and signed a note for the balance. Dawson debited the Equipment account, credited Cash and

Rear wheels of Toro mower are locked [ 2 Answers ]

My Toro riding mower is sitting in my yard with the rear wheels locked. The motor will start, the cutting blades will rotate, but the riding mower will not budge, and it cannot be pushed. The rear wheels are frozen! What is wrong?

Toro 57360 Clutch locked in engaged mode [ 2 Answers ]

Cannot shift when engine running, and mower keeps trying to move forward. Installed new belt. Ran following test: Park Brake ON Wheels chocked Tranny in neutral Clutch Depressed or Not depressed (makes no difference) Transaxle pulley still turns.

View more questions Search