 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
When I turn my A/C on, the furnace turned on instead. We changed circuit breakers, thermostats, but still the heat came on instead of the air. The A/C unit was checked out and it was fine Because we were having a heat wave at that time in NYC, the HVAC tech just disconnected the furnace and said...
Won't stay lit. error status is 5 blinking lights. Can be reset after disconnecting and reconnecting power. Sometime may be started by turning off and then restarting. Sometime igniter will begin to glow, but stops quickly before the gas starts. The small top blower is running and the large bottem...
My furnace will come on it if I hit the circuit breaker. After that it never comes back on. Anyone know what is wrong or what I should try? I have turned it off and did the basic things but nothing happens. Help! Kurt
I have a York Diamond 80 central air unit that won't start. It's nine years old. The outside condensing unit runs but the inside blower will not start. It makes a light humming sound.
Furnace diagnostic light indicates rollout open. Service tech came out and found that rollouts were not tripped. He seems baffled by the problem. The problem is inconsistent. The thermostat calls for heat. The furnace kicks the blower on without igniting burners. Cold air blows through vents. I...
View more questions Search
|
