Ask Experts Questions for FREE Help !
Ask
    Craig2Craig's Avatar
    Craig2Craig Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2013, 01:20 PM
    Remove a Grohe faucet
    How do I remove a Grohe Europlus model 33 939 faucet?
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #2

    Oct 10, 2013, 02:42 PM
    Hi C2C
    There is a "kinda" horseshoe shaped washer and a nut on the underside of the faucet... see image below.

    Use a crescent wrench or a deep socket to get to the nut and loosen it to remove the nut/ You will need to disconnect the water connections and the pull out spray for easiest removal of this valve... ;)

    Mark
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to remove a Grohe kitchen faucet [ 20 Answers ]

I'm replacing our kitchen sink. It has a Grohe Lady Lux faucet that I'd like to reuse. Can anyone tell me how to get it out of the sink? From what I can see (the sink is out) there's a horse shoe shaped nut on the bottom but turning it will damage the supply lines coming from the faucet. ...

How do I remove the Grohe handles? [ 10 Answers ]

I have an old Grohe bath faucet. The hot water side will not open all the way. Not sure if it is a washer issue or what. Each side has a hexagonal insert (at least I think), with GROHE labeled on each. I assume I am to pop it out which would expose the screw beneath. I can't seem to even get an...

How do you remove the Handle from a Grohe Lady Lux Kitchen Faucet? I have included a [ 3 Answers ]

http://www.grohecatalog.com/product/33759g A link to a picture of the faucet above.

How do I remove the spout from the base of a 31663 exquist grohe kitchen faucet? [ 1 Answers ]

Grohe faucet leaks [ 2 Answers ]

I have a Grohe LadyLux model 33755 faucet. Last year it developed a drip that ran down the hot water line. I contacted a local Grohe rep who send me a replacement "mixing valve" that I installed in the body. This seemed to fix the problem, until today, when we discovered a drip running down down...

View more questions Search