Ask Experts Questions for FREE Help !
Ask
    robert dye's Avatar
    robert dye Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2013, 12:57 PM
    4 wire
    How to wire a receptical that has 4 wires
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Oct 10, 2013, 01:07 PM
    how to wire a receptical that has 4 wires
    You are going to have to say more than that. I've never seen a receptical that had any wires.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Oct 10, 2013, 01:48 PM
    how to wire a receptical that has 4 wires
    Please restate this.
    This site is not a search engine, so you need to ask what you want to know and give as many details as you can.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #4

    Oct 10, 2013, 04:52 PM
    Hook the 2 hots to the hot terminals, neutral to neutral terminal, and ground to ground terminal. Not tough, many other factors, wire size, amps...
    Electricity can still kill.
    More info will help us and you, thanks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Low voltage wire to heating element gets hot and melts the wire and burns wire into. [ 4 Answers ]

Where low voltage wire from sequencer plugs into heating element gets hot and melts the wire. What causes this? I changed the wire out, but it does it again.

Explain which wire is ground wire when you have 2 black wires and 1 white wire [ 5 Answers ]

Explain which wire is ground when you have 2 black wires and 1 white wire

Is hot wire is not a neutral wire or vice versa in single phase two wire AC source? [ 1 Answers ]

I am a little bit confused why in AC single phase 2 wire source is merely classified the 1 wire as hot and other wire as neutral. The hot wire travels the current from the source to the load and going back the current to the source through the neutral wire. I know that in AC circuit, the signal or...

Black wire red wire and white wire spliced to 10/3 on a 220 circuit [ 25 Answers ]

I have installed a disconnect between my dryer receptable and a tanning bed. I want to splice the 10/3 box wire to the existing 220 wiring at the dryer. Dryer= red, black, white and bare ground wires 10/3 wire= black, white, and bare ground How do I splice these to allow the disconnect box to...

How to tell which wire is the hot wire, neutral wire and ground wire [ 10 Answers ]

View more questions Search