Ask Experts Questions for FREE Help !
Ask
    rc666's Avatar
    rc666 Posts: 18, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2013, 06:23 AM
    Interior windows trimming
    The question is about interior windows trimming.
    What kind of wood is the best and economic choice?
    I need to cover 2x4 studs and then trim around. This is new contraction windows.
    Thanks,
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Oct 6, 2013, 06:54 AM
    The cheapest is probably 2 1/2" colonial casing sold at Home Depot and Lowe's. It's clear pine and can be stained or painted. You miter the top corners.
    You can also buy solid white vinyl in the same style but I think it costs more.
    rc666's Avatar
    rc666 Posts: 18, Reputation: 1
    New Member
    		  
    #3

    Oct 6, 2013, 08:45 AM
    This is what I have to do.
    Attached Images
      
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #4

    Oct 6, 2013, 08:52 AM
    That window isn't installed yet? It's in backwards?
    Lumberyards sell the casing trim material too, either clear pine or vinyl, in the width you need. Just cut, put some caulk on the back, a few fine nails, and put the trim on, with a slight edge of the casing showing. If you want to get fancy with a sill (stool cap) you can, or not.
    rc666's Avatar
    rc666 Posts: 18, Reputation: 1
    New Member
    		  
    #5

    Oct 6, 2013, 09:00 AM
    What is on my mind, what would be the best and economical to cover the studs. This is what I have to do first.
    I'm planning to build the whole "frame" and place it in to the opening. I was thinking about vinyl.
    Windows are installed already.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #6

    Oct 6, 2013, 09:22 AM
    Window is in right. Install a sill, trim sides and head with stock or ripped stock and then colonial or clamshell casing depending on the rest of the house. Cheapest solution would be a cut drywall return and edge with no trim. That gives you a contemporary finish but is not my style.
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
    		  
    #7

    Oct 6, 2013, 09:49 AM
    Brian has set for you the nicest appearance.

    Install a window stool and apron. Box window top and 2 sides with 1 by 3.
    Make flush with S/R. Trim with casing. Paint or stain.

    Chuck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Exterior windows trimming [ 5 Answers ]

Hello, I'm looking for help with my new windows I just installed. The question is about exterior trimming. I don't know what to do next and how to trim my windows to make it look nice. I'm thinking about vinyl trim. There is cedar siding on my house. I'm looking for options I have as well as...

Frost buildup on interior walls/windows of winterized home [ 7 Answers ]

We purchased a vacation home this year, located in central Minnesota. Rather than heat it all winter, we winterized it. I went to the place yesterday to check on it, and I noticed that there was a large amount of frost build-up on the windows, doors, and some of the walls (I could definitely...

Condensation on the interior of new double paned windows [ 4 Answers ]

Is there any reason that condensation is occurring on the interior of our new double paned windows?

Trimming interior hollow door [ 4 Answers ]

I need to trim off 1/2 to 3/4 inch from the bottom of an interior hollow door to negotiate with the new tile floor, but I'm concerned about compromising the integrity of the door once I do that. Is there some sort of cap I can place on the bottom of the door to fill the gap once I trim the bottom...

View more questions Search