[Rachael_durbin]

I have a 98 Chevrolet silverado recently the truck has been very hard to turn especially to the right, already replaced 2 power steering pumps. Something is making them go out. I have a lift/leveling kit on the truck, on 35s. I can hardly turn the wheels at all unless I give it a lot of gas. Something is causing it to do this but we are baffled at what it is. A couple of months ago one of the upper a-arms did snap, on the right side. And we replaced it but the arm is a stock arm and the other is an aftermarket that came with the lift. But we don't want to spend all that money for another lift just to get those aftermarket a arms, were not even sure if it is the a-arm that is the problem. Please help

[ma0641]

Could be your lift kit and the 35 s. Lots of extra torque needed. Ackerman angle too far off, scrub radius etc. The fact that you already broke an A arm is indicative of a high sprung weight from the tires.