 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whole house surge protector
I am looking to install a Sycom whole house surge protector in my circuit breaker box, does the dual pole 20 amp breaker need to be in the top position in the circuit breaker box?
|
||||
|
|
|
||||
|
Install equipment as required by the installation instructions... NEC 110.3(B)
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
One circuit during a thunder storm always Affects the clock and TV. They still have power And the breaker does not trip. But I have to be reset the clock, and turn the TV back on. They are on a power strip. Do you think I should use a power strip with a surge protector? Would that make any...
Is it okay to plug voltage regulator on surge protector? I have100V ps3 and a 220v large lcd TV plugged into my voltage regulator and I am planning to plug this into the surge protector that I purchased earlier to avoid surges and spikes. Can my surge protector handle all the electronics + the...
Why would both the surge & ground lights come on and stay on when I plug in and turn on my surge protector? This happens with both a good (expensive) older surge protector and the new one I just bought. I bought a new one after someone suggested my protector wasn't working properly. The new...
I recently bought a Whole House Surge Protector from Home Depot. Here is a link to the manual for reference. I read on the internet that some people suggest to keep the wires from SPD to the breaker as short as possible, under 1 foot, while other stress the location of the breaker (as close as...
Which is the best protection for a computer from lightning: to uplug the surge protector for the computer from the wall... or to just flip the switch on the surge protector to OFF?
View more questions Search
|
