 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Cylinder position sensor code p1381
Hi my name is frank I drive a 01 honda accord. Due to the code p1381 which requires to replace the whole distributor. I have replaced it twice from autozone got my money bacl and bought one from oreillys. And today it did the same thing it popped up p1381. What should I do
|
||||
|
||||
|
Install a genuine Honda distributor housing, along with an aftermarket igniter and coil--this will keep the cost down. Aftermarket manufacturers of Honda distributors can't seem to get the CYP, TDC, and CYL position sensors right. I've seen people go through a half-dozen aftermarket Honda distributors and still not fix the problem. This will solve your problem and give you the reliability you need.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, My 97 civic just started showing an error code 1381 (P1381--Cylinder Position Sensor Intermittent Interruption). My understanding is that if it is a problem with the individual sensors, the distributor has to be replaced - because they don't sell the individual sensors. Last July the...
I have a 99 Accord. Although the engine check lights are not on, I observed the car occasionally does not rev above 3000rpm. I ran the checks and got the error code- P1381. Please what parts do I need to change?
To fix the (cyp) cylinder position sensor do I have to replace the whole distributor or can I just replace the housing?
I did I replace the distributer,spug pluges,wire,cap My chckengine light cam back on whit the same code p1381 Don't know what to do?? I need mog test too
The car idles randomly after warm up.I check the ecu for codes and it gives 4 crank angle sensor and 8 tdc position sensor. I did a search and one of the ad posted by a guy in Canada says that he had to get part from different vehicles until he got all of them to work properly. Will I be able to...
View more questions Search
|
