 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Drain pump connection to sink drain piping
I am installing a Hoshizaki under counter ice machine (C101-BAH) with a drain pump and someone told me to connect the discharge tubing from the pump to a reverse p trap. First question is what is a reverse p trap? Second question is where in the line to you make the connection?
|
||||
Check out some similar questions!
Hello, was wondering about ways to tightly reconnect a bathroom sink drain to the sewage stack (please see photo): http://s8.postimg.org/ksio1icsh/IMG_20130917_101205.jpg The plastic 1-1/2 in. pipe of the old P-trap was just pushed inside the galvanized nipple without any putty or threaded...
I just replaced a kitchen sink and the replacement drain configuration has a dome shaped covering over the end of the pipe. Searched for an explanation of it function, but most explanations seem to just focus on the slip joints and elbow connection to the sink bowls. Since there is no threaded...
The drain pipe connection is frozen. The nut under the sink is corroded and very thin. It is difficult to grab with any kind of tools I have. And when I barely grab it, I can not exert enough force to loosen the connection. I sprayed plenty of liquid wrench. And when I manage to turn it a bit,...
I am installing a steam generator for my shower. The unit has an attached drain pan with a "smitty drain" 3/4 inch connection. I am lost as to how to connect this to the black PVC drain system in my home. Thanks for any help here.
I am on city service. I would like to connect my basement washer drain into the existing floor drain (3" line). I cut the line about 3 feet down from floor trap and installed a 3x2inch y. This existing floor drain takes a 45 turn about 6" down from where I cut it. The 2 inch will drain the washer ....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
