Ask Experts Questions for FREE Help !
Ask
    Neil Cook's Avatar
    Neil Cook Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2013, 06:33 AM
    State Select Water heater problem.
    We have plenty of hot water, but. The power vent blower turns on, you can hear the burner light, it runs a few seconds and shuts off. A few seconds latter it starts again and works fine. This has been going on several months and really doesn't cause a problem of having hot water. Is there a simple fix I can do so that this doesn't keep happening? We have a State Select Power Vent Unit.
    engr76vpi's Avatar
    engr76vpi Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Sep 23, 2013, 10:04 PM
    I had a GE with the same problem. Ended up replacing the gas valve. Unit was only 1-yr old.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Sep 24, 2013, 08:53 AM
    Quote Originally Posted by Mntclimber View Post
    Does anyone know which configuration the valves haft to be in, in order to switch from heat to air conditioning? Any advice or help is greatly appreciated.
    ?? Ask your question in Heating and Air Conditioning but give us a lot more information please.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

State Select Water heater problem [ 2 Answers ]

I have a State Seclect as water heater in my home. The model number is PR650NOVT. I had a flood in my basement that was deep enough to cover the pilot lite and burner in the water heater. Once I drained the basement I dried the water heater out, lit the pilot and the water heater fired up and has...

State select water heater [ 1 Answers ]

Probably simple question... Pilot light went out and when reset it will not stay lit. As long as I hold button down, it stays on, but will extinguish as soon as I release it. What's best troubleshoot?

State Select Electric Water Heater Resetting Problem [ 2 Answers ]

My state select 40 gln water heater is not running hot water and not able to locate where the reset button is. I checked the manual and it is older then my unit. But it did say to remove the retangle side piece, shutting power off first.. then pull the insulation out and press the reset button. ...

State Select Water Heater [ 3 Answers ]

We have a state select power vent water heater. Last October it stopped working and the plumber replaced the ignitor as the wires had shorted out. Then it happened again in the beginning of January 2008 and he again replaced the ignitor. Well, our water heater stopped working again today and the...

State select water heater [ 1 Answers ]

My state select electric water heater,just stop working and I don't know how to bringing back to work,any ideas.

View more questions Search