 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
York Diamond Series 80 Furnace
When I turn my A/C on, the furnace turned on instead.
We changed circuit breakers, thermostats, but still the heat came on instead of the air. The A/C unit was checked out and it was fine Because we were having a heat wave at that time in NYC, the HVAC tech just disconnected the furnace and said "call me in Sept." Well its September and I just want to make sure that they don't rip me off and tell me I need a new furnace. Has anyone any idea why this is happening? Thank you. |
||||
Check out some similar questions!
We have a york diamond 80 furnace. Heat does not kick on unless we manually adjust the digital thermostat. The heater will run for approx 3 minutes and then will turn off. We replaced the batteries and reset the thermostat. The heater is located in the basement. I am not sure if it is...
My furnace will come on it if I hit the circuit breaker. After that it never comes back on. Anyone know what is wrong or what I should try? I have turned it off and did the basic things but nothing happens. Help! Kurt
How to light the pilot of the york diamond 90 furnace
Furnace diagnostic light indicates rollout open. Service tech came out and found that rollouts were not tripped. He seems baffled by the problem. The problem is inconsistent. The thermostat calls for heat. The furnace kicks the blower on without igniting burners. Cold air blows through vents. I...
YORK Furnace Diamond 90 Model P3URB10N05501D Shows a code 7 What do I do now?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
