Ask Experts Questions for FREE Help !
Ask
    Suryavan's Avatar
    Suryavan Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 16, 2013, 11:29 AM
    State select water heaters
    I got a gas water heater that look to be no gas pressure to pump gas after lighting up... I can see the frame inside but it would go off in a while. Is that anywhere we can make any adjust to it so we got the gas pressure?
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Sep 16, 2013, 11:34 AM
    You didn't bump and bend the thermocouple when you was trying to light it... did you?

    They are designed to shut the gas off if the flame goes out.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

State Select Water Heaters [ 1 Answers ]

What is the warranty life on State Select Water Heater GS650YBRT?

State Select water heaters [ 1 Answers ]

I have a 30 gallon State Select Water Heater Model GS630YBRS. It is just under 6 years old and still under warranty. After I get out of the shower the burner will kick on. Before it is done heating the tank it will go "thunk" and will turn off the burner and blow out the pilot light. Sometimes the...

Select State water heaters [ 1 Answers ]

I have a select state water heater and the pilot light won't stay lit. What's wrong?

State select water heaters? [ 7 Answers ]

I have a 40 gallon state select water heater.There is a red reset switch undernieth the top access panel I have had to reset this several times in the last week.Why?

State Select water heaters [ 1 Answers ]

Hi, ::) Are State Select water heaters a quality water heater? Thank you.

View more questions Search