Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
     
    #1

    Sep 9, 2013, 10:44 AM
    Door Grill Aluminium.
    Needed to protect the screen door. Friend said to use staples for attaching.. But screen door is made of metal. If I cut the mesh
    How do I attach it to the metal surface . Maybe use small sheet metal screws? Or some-other way?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Sep 9, 2013, 01:50 PM
    Sheet metal screws or pop rivets and washers.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
     
    #3

    Sep 9, 2013, 02:22 PM
    Thanks
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #4

    Sep 9, 2013, 08:24 PM
    Use self tapping sheet metal screws. Will not have to drill pilot hole.

    Chuck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

Aluminium wire [ 1 Answers ]

New information on use of aluminium wire

Antioxidantcoating-aluminium [ 0 Answers ]

Dear Sir, I need aluminium antioxodant coating on Earthing Strip of size 25x3mm for a.C. Plant Room Cabling. Please suggest, Sunil-09822713844

Best way to attach aluminium rail to stone (shower door). [ 1 Answers ]

I recently installed a frameless sliding shower door. The bottom rail was placed on a strip of stone ( 3" wide by 5 ft). The sliding doors etc are ok. The bottom rail is in place only by virtue of the two vertical pieces - so. although it is not going to come out, there is sme amount of "play". ...

Why do the aluminium ions move to the negative electrode in the process of aluminium [ 1 Answers ]

In the process of getting aluminium by electrolysis ,why do aluminium ions mve to the negative electrode?

Design Of Grill Blade Thickness ( Gravity Louvered Grill Blade) [ 3 Answers ]

Kindly Design An Gravity Louvered Grill, It is Required For Staircase Pressuriation System Design Thickness Of Blade Such That It Should Lift When Pressure Exceeds 50 Pa,& Close When Pressure Drops 50 pa It Is a 20 Storey Building ( 20 Staircase) System Pressure 50 Pa


View more questions Search