 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Having problems with our intertherm lp furnace. It runs for a while and then it kicks out the high limit reset on the purge blower fan. Then we shut the furnace off and reset the high limit switch button on, and it comes on again. We currently have the thermostat set at 67, if we increase the...
On the hot serface ignition down by where the wires go in there is a flashing red light coming from I believe the blue wire, and the furnace won't start
Furnace kicks on and off when suppose to but when blower shuts down the heating element doesn't have to flip switch to shut off element
1986 intertherm electric furnace<only blowing cool air on heat setting. I inspected the heat coils and they don't look broken
I have an Intertherm furnace model mmha056aahr05. Glow plug lights burner starts then shuts down. 3 blinking lights on the code says gas valve error or false flame sensed. Any ideas on problem solving or where can I get a manual Thank You
View more questions Search
|
