Ask Experts Questions for FREE Help !
Ask
    bob409's Avatar
    bob409 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2013, 04:55 AM
    Kenmore series 90 washer is not letting cold water run in?
    We had well problems and some grit/iron might have gotton to the washer. Is there a filter on the water input side to keep out sediment?

    The washer gets stuck in the fill cycle?

    Thanks,

    Bob... very happy with our washer and dryer and know this is a water issue not washing machine issue, but please help!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Sep 8, 2013, 05:27 AM
    Turn off the water and disconnect the water lines. You will either find a steel or plastic mesh screen. Mine has a small tab that can be caught and pull out the screen. If you have sediment why not install a whole house filter. I have one on my well that uses a 30 micron filter.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How much water does a Kenmore 90 Series washer use? [ 2 Answers ]

I'm renting a home in Texas where water is always scarce, and I'm thinking of draining the washer into buckets to water plants. Anyone know how much water we're talking about? Thanks!

Kenmore 80 Series Washer: Fills with water but won't progress to run any cycle? [ 0 Answers ]

Water fills, then nothing. None of the cycles will begin.

The cold water on our Kenmore 80 series washer comes out very slowly? [ 1 Answers ]

The cold water on our Kenmore 80 series washing machine comes out very slowly when filling/rinsing. I've check all hoses/filters etc... What next?

I have a kenmore 70 series when I fill with water, all the water run out. [ 0 Answers ]

I have a kenmore 70 series when I fill with water, all the water run out. What can be the possible cause

View more questions Search