 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Coleman furnace starts work at 2nd try
At 1st try, the inducer runs, igniter lights, hears gas valve clicking, and ssss sound, but the burners do not get fire. I can smell a little bit gas - the valve for some reason didn't open big enough.
Everything works at 2nd try. PLease give me some clues. THanks Mark |
||||
Check out some similar questions!
I have a Coleman Evcon model # dgat070bdd that is'nt working. When I kick up the thermostat, a fan kicks in (combustion air fan),it runs for aprox. 60 sec. than there is a click followed shortly by a thunk from the gas valve. After a bit, the gas valve thunk again, shortly after that the whole...
Where is the heat anticipator setting for a coleman evcon furnace model dga2075800
I have a Coleman Evcon model DGAT070BDD furnace. With the thermostat turned up all the way, and the ventalate setting on auto, it won't fire up or blow air. THe blend air box on the front of the unit just humms (loudly, but if I tap it with a finger, it gets much quieter). When I move the ventalate...
I have a manufactured home with a Coleman Elec. Furnace/AC and the blower won't turn on when the AC is running but the blower works when the heat is on. I am confused. Can someone help me with this problem? Thanks
Coleman evcon model #bgm075166 Here is process: I turn to temp with thermostat Furnace comes on and there's a click for the ignitor Ignitor glows then flame is started Ignitor clicks then turns off Then the flame cuts off shortly after the ignitor does The furnace then retries to ignite 2...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
