Ask Experts Questions for FREE Help !
Ask
    dsa0214's Avatar
    dsa0214 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 28, 2013, 07:24 AM
    98 Ford Windstar Sloppy Shifter
    My 98 Windstar has a problem with the shifter. It's extremely difficult to get it to shift into park, which prevents it from starting if you didn't get it into park the last time you drove it, and the van will actually start rolling if you don't get it into park (this is odd to me, because I thought if it was in gear, it wouldn't move once the engine is turned off). You have to pull the lever down and almost slam it into park (I know, this is making it worse, but that's the only way my wife knows how to make it work). Also, when you shift OUT of park, it feels like it's in reverse because it only went over one notch, but it's actually in neutral and has skipped right over reverse. Putting it in drive is just as bad - there's just this big, loose area that encompasses reverse, neutral, and drive and you can barely hear a faint click when switching between them. The best way I can describe it is "sloppy". The transmission seems fine when driving, no problem going through the gears. Just getting it to shift into the right gear to begin with is the problem, so I wonder if it's a problem with a linkage or something right in the steering column or something, it almost has to be something simple. Thanks in advance for any help!
    N0help4u's Avatar
    N0help4u Posts: 19,823, Reputation: 2035
    Uber Member
     
    #2

    Aug 28, 2013, 07:43 AM
    Sounds like you need transmission work. In the meantime to help from worsening the shifter she can try starting the vehicle in neutral rather than fighting the shifter

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My ford windstar [ 2 Answers ]

I replaced the mass air flow sensor and the idle air control valve and my check engine light is still coming on with the code p1506 which is saying malfunction with the idle air control valve which is new what could be the problem now and its not a defective part I have had three different valves...

98 Ford Windstar [ 7 Answers ]

I have a 1998 ford windstar and mycheck engine light came on and the code was for the idle air control valve I replaced the valve and the reset the light but the light came right back on after driving a few miles then my transmiission would shift down ih to the first gear while I'm driving...

How much to fix shifter on 2003 ford taurus [ 2 Answers ]

My 2003 ford taurus gose into gears except park. Had to put in neutral and put e brake on.. What's wrong?

Shifter lever for automatic transmission sloppy [ 1 Answers ]

Any way to confirm problem before beginning to repair problem? I have a shifter lever that is kind of sloppy in the steering column. I can't tell for sure what the problem is and I don't want to start in the wrong direction before I confirm what the problem is. My hypothesis is it's the cable...

99 ford taurus column shifter doesn't work [ 5 Answers ]

Shift lever is stuck and won't shift the transmission


View more questions Search