Ask Experts Questions for FREE Help !
Ask
    nbogdanovich's Avatar
    nbogdanovich Posts: 7, Reputation: 1
    New Member
    		  
    #1

    Aug 23, 2013, 12:47 PM
    Blower motor wiring - 6 colors, but no black or white wire!
    Please help! Wiring new blower motor, stored since manufactured in 1970!
    No black or white wires! Typically black is high speed & white is common.

    6 wires same length & gauge: green red yellow blue brown purple (violet)
    2 black wires on external capacitor

    Which is common? High speed?

    Thank you kind sir! I owe you a cold beer or 6!

    Eastern Air Devices B63B8D-1
    Contacted EAD - they wished me luck!
    115/230 V
    50/60 Hz
    1 Ph

    http://i268.photobucket.com/albums/jj17/nbcaus/sell/blower1.jpg
    nbogdanovich's Avatar
    nbogdanovich Posts: 7, Reputation: 1
    New Member
    		  
    #2

    Aug 23, 2013, 12:56 PM
    No wiring diagram or labelling (otherwise I wouldn't be asking)

    So:
    Green - ground
    Red - low?
    Yellow - med low?
    Blue - med hi?
    Brown - capacitor?
    Purple (violet) - ?

    Thanks again!
    nbogdanovich's Avatar
    nbogdanovich Posts: 7, Reputation: 1
    New Member
    		  
    #3

    Aug 23, 2013, 08:54 PM
    I still need an answer. Please see newer revised question, same title. Thank you!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to connect 3 wire black white bare to 4 wire black red white green [ 3 Answers ]

Fits 220 volt the wires are described in the title. Can someone tell me the proper way to connect them?

Needing wiring instructions for white, yellow, black wire for thermostat [ 0 Answers ]

Hooking up honeywell rth2310 but I only have black, white & red wires?

I have Hunter Fan with wire colors yellow, white, gray, black, how are they wired? [ 1 Answers ]

I have a hunter fan I purchased three speed switch. The fan wires are yellow white black and gray how should they be place into positions 1, 2, 3, L, aine the previous switch was a one speed?/

Wiring a fan with a red, black and white wire in junction box [ 5 Answers ]

Yes, this is the situation. I bought a fan with the following wires: White, black, blue (down light) and gray (up light). I do not have a down light. The junction box comes with a red wire, black wire and white wire. There are two wall switches to control the light and to control the fan...

New blower motor has no white wire [ 3 Answers ]

I installed a new blower motor and the new blower did not have a white wire. Now the blower want work at all. How can I get this to work?

View more questions Search