Ask Experts Questions for FREE Help !
Ask
    chrisg74's Avatar
    chrisg74 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 13, 2013, 05:19 PM
    Generator LDE6800T voltage faulty engine runs fine but no power
    LDE6800T generator engine runs fine but no voltage coming from it at all I'm thinking the (avr) is there anyway I can check before I buy 1 please somebody help cheers chris pulling me hair out
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 22, 2013, 01:06 PM
    Hi,
    I see it under the Leading and Maverick brand names though it is actually made in mainland China by Fuzhou LEADING Power Co, Ltd. Manuals seem to be a bit difficult to find because they require translation. I did find a posted wiring schematic.
    I would suggest looking for tripped circuit breakers that have push button resets.
    Peace,
    Clarke
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Running fine, to loss of power and sputtering, with a check engine light! [ 0 Answers ]

Stopping at the store from riding fine, to starting it up to a check engine light and loss of power and spuddering?

Generac 7550 EXL Generator - Motor Runs - no power [ 3 Answers ]

The unit quit putting power out motor runs I am getting 4-5 volts out of the receptacles I took the cover off the end unplugged the connector from the windings to the control panel and got 1.5 - 2.5 volts out of each lead (4 total) I checked for continuity between the leads and have it between...

How to choose the voltage of a 2MW generator for a Mini Hydro Power Plant [ 2 Answers ]

What is the consider to choose the voltage of a generator? Give me the reason why you choose 380 V, 400 V, 4,3 kV, 6 kV, etc

Ingersoll Rand G7HE Generator - Runs - No Power [ 1 Answers ]

The unit quit putting power out motor runs I am getting 4-5 volts out of the receptacles I took the cover off the end unplugged the connector from the windings to the control panel and got 1.5 - 2.5 volts out of each lead (4 total) I checked for continuity between the leads and have it between...

Briggs & Stratton 10 HP OHV Generator Engine runs rough [ 3 Answers ]

I have a portable generator with a Briggs & Stratton 10HP OHV engine. I store it for months at a time and then add just enough gas to run if for about an hour until it runs out of gas. After two years the engine now runs rough. I have to leave the run/choke switch almost on full choke to keep the...

View more questions Search