Ask Experts Questions for FREE Help !
Ask
    lujan05's Avatar
    lujan05 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 21, 2013, 07:34 AM
    Washing machine will not fill with cold water at the rinse cycle
    I have a whirlpool washing machine. When the machine reaches the rinse cycle, it will not fill with cold water. I can hear the machine humming. The hot water will fill but not the cold. Can you help me
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Aug 21, 2013, 10:08 PM
    The cold water is probably not working during the main fill either. Take the hoses loose from the back of the machine and look at the screens. Remove them with a pair of hemostats or needle-nose pliers, but be careful not to deform the screen. Clean it well and water should now flow. The only part that would cause it to fill on one cycle but not others is the timer. It's a very rare problem, though.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer does not fill with water in rinse cycle [ 0 Answers ]

My Kenmore 80 series washer purchased in 2006 does not completely fill water in the Rinse cycle. It is OK in the wash cycle, but when it gets to the rinse cycle, it only fills about 60% and it stops. I had to manually push the knob to stop and then turn the knob to like I'm going to start all...

Washing Machine stops between first wash and rinse cycle [ 0 Answers ]

Our washing machine (Kenmore Washer 110.92588210) stops between the first wash cycle and the rinse cycle when it is on the normal setting. On any other setting, it operates fine. Is there something wrong with the setting dial (burned out connection)? Thank you. Ed Bulman

Washing machine that stops at spin and rinse cycle, any ideas why? [ 2 Answers ]

This washing machine has been working but the problem is when it gets to the spin and rinse cycle it stops, as if it just soaks in there and the water doesn't drain out. Any ideas what the problem could be and can it be fixable. I don't know much about washing machines, so easy terms would be...

Rinse cycle will not work on whirlpool washing machine [ 0 Answers ]

I have a whirlpool washing machine and all of a sudden the rinse cycle will not work when it gets to the rinse cycle there is just a low buzzing sound but all of the other cycles will work. Please help me with this problem asap. Thanks!

Washing machine on final rinse takes for ever to fill water up. [ 1 Answers ]

Fridgidaire Washing machine on final rinse takes forever to fill up with water. It only happens on the final rinse, it takes 45 minutes to an hour. Any one have a clue, or do I need to reset something on this unit.


View more questions Search