Ask Experts Questions for FREE Help !
Ask
    Arenella's Avatar
    Arenella Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2013, 01:34 PM
    My steering on my troy bilt super bronco
    When I turn the steering wheel straight one tire is straight and the other tire turns to the left. What is the problem?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 12, 2013, 08:08 PM
    The gear on the steering shaft may have twisted on the splines or the rack may be worn. Need to drop the deck to see what is wrong.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Aug 22, 2013, 12:45 PM
    Hi,
    I would say you have a broken tie rod or tie rod end, which ever your machine uses to fasten the steering together.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy Bilt Super Bronco Manual [ 1 Answers ]

I have a 2006 Troy Bilt Super Bronco riding lawn mower, need to know if their is any fuses in the wireing to prevent it from starting, I have checked the battery and soliniod, and they are working fine, but when you go to turn on the ignition key and try to start it, no click, no nothing. Thank you

Troy bilt super bronco [ 1 Answers ]

On my mower the steering wheel just keeps turning and the wheels don't turn. From reading other posts it looks like I may need to replace the hex flange bearing, but I cannot get the stupid nut and pinion gear off to do so.. please and help is greatly appreciated

Troy-bilt Super Bronco will not start [ 0 Answers ]

I have a model 13AT609G766 Super Bronco with a 21.0hpv twin it will not start, I had it running and when I pushed the lever to start the mower blades it died now it won't start. Can anyone help me, it will start if I spray starting fluid on the air filter but it dies after it burns off the starting...

Remove steering pinion on Troy-Bilt Super Bronco Lawn Tractor [ 5 Answers ]

The steering clicks when attempting to turn left on our Troy-Bilt Super Bronco Lawn Tractor. We are trying to remove the pinion and steering column to check the parts for damage. What is the best way to remove the pinion gear after you've removed the bolt and washer holding it on? Do we need to...

Troy Bilt Super Bronco [ 1 Answers ]

Looking for a diagram of a Super Bronco deck. Had to replace a tension spring but don't think is in the correct place. The diagram in the manual isn't too clear on the springs placement. The belt is very loose and doesn't have the cutting power it used to.

View more questions Search