Ask Experts Questions for FREE Help !
Ask
    sscholtz's Avatar
    sscholtz Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 7, 2013, 04:04 PM
    How do I replace the on off switch on my husky power washer 1750
    My 1750 husky power washer needs a new on off switch how do I replace it?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 8, 2013, 12:17 AM
    It should be easy. Buy a switch, take out the old one and put in a new one. It's not hard to do.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky power washer 1750 problems [ 4 Answers ]

My Husky power washer 1750 motor will not shut off. Motor runs continuously even after squeezing handle. I have not pressure with high pressure nozzle; however, the variable nozzle seems to have better pressure. Help!! Thanks, Melissa

Husky Power Washer 1750 [ 1 Answers ]

when you release trigger on the spray gun the motor will not shut off. This only happens when using the variable spray nozzle.

Husky power washer 1750 why it start and stop frequently [ 1 Answers ]

Machine is start and work few minutes that also star stop again and again. Then it stop completely few minutes. Then when you off and on the switch same way it works

Husky power washer 1750 psi troubleshoot [ 4 Answers ]

My husky powerwasher cycles on and off in approx 30 second cycles. How can I keep it running. I have tried taking the wand (nozzle) out and the unit runs fine. Is it just the wand that has worn out of been damaged? Vic

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...

View more questions Search