Ask Experts Questions for FREE Help !
Ask
    Bioman69's Avatar
    Bioman69 Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 6, 2013, 06:00 PM
    No water from bath faucet
    My mom has no water in her bathtub. The faucet is a single handle knob, that you pull out to let the water run, and turn either left or right for hot or cold. I do not know the brand of the faucet - it's the original from 40+ years. She has water to the rest of the house (sinks, toilet, etc.), so we know its not the water supply. Any help?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Aug 6, 2013, 06:14 PM
    Show us a picture of the valve.
    Bioman69's Avatar
    Bioman69 Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 6, 2013, 06:42 PM
    I don't have a picture of the valve yet - I haven't tried to disassemble it yet. Also - just found this on your site :

    https://www.askmehelpdesk.com/plumbing/no-water-coming-out-bath-tub-faucet-362706.html

    This seems to be exactly what is happening to my mom! I even think that her faucet is a Moen (my memory is fuzzy on this, but it seems to ring true), so it ties into that link perfectly! I am going to work on it tomorrow and update my progress.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #4

    Aug 6, 2013, 07:54 PM
    If it is a Moen valve. Turn off water, remove center emblem of valve handle with sharp pointed tool. Remove screw that holds handle on. Remove handle, remove the chrome or brass cover sleeve. Simply pull out with pliers. Remove horse shoe clip that holds cartridge in valve. Reinstall handle, use handle to pull cartridge out.

    Turn water on briefly to flush any debris in valve.

    Reinstall cartridge. When reinstalling cartridge install it with the stem pulled out (open position). This will allow air trapped in the valve to escape so that the cartridge can seat properly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water at master bath roman tub faucet [ 7 Answers ]

We just purchased a slab foundation house in Florida that was built in 2001. The master bath has a garden tub with a Delta 2 handle roman tub faucet. There is no water at all (hot or cold) to the faucet. I tried replacing the stems in the faucet valves but still nothing. I can't locate shutoff...

Hot water from faucet short-lived but OK from bath faucet [ 0 Answers ]

I have a shower/bathtub setup where you pull a lever to divert the water from the bathtub faucet to the showerhead. Lately I have been having a problem maintaining hot water from the showerhead, but not from the bathtub faucet. Hot water comes out of the showerhead for anywhere from 3 to 5 minutes...

No water coming out of the bath tub faucet [ 11 Answers ]

I tried to turn the water on in the bath tub, but the push pull action isn't working and no water comes out. Could it be a problem with the cartridge (it's a Moen faucet)? Help!

Low water flow from bath faucet after new water heater [ 7 Answers ]

I just had my water heater replaced by a plumber. Now the hot water flow and pressure is about 1/4th of what it used to be at the upstairs tub faucet. Other faucets in the same bath seem low as well but it is hard to tell. The bath tub faucet had great flow before and would fill the tub in 5...

Shower/bath faucet water comes out of both [ 2 Answers ]

In the process of redoing our bathroom. We put in a brand new bath/shower faucet. When we turn on the water it comes out of both the shower head and the bath spout. It is a single handle model. This is the 3rd model and 2nd brand of faucet we have tried and all do the same. Can any one help...


View more questions Search