Ask Experts Questions for FREE Help !
Ask
    Americanchamp's Avatar
    Americanchamp Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 5, 2013, 11:37 AM
    I need to divert flow to 4 separate locations automatically
    Hello,
    I'm putting together a Hot tub and would like to divert flow to 4 - 5 locations automatically. Do you have any solutions to this ?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Aug 5, 2013, 11:51 AM
    PVC pipe manifold would be one way. They are used in underground sprinkler systems. Could also use a PEX piping manifold. You might try a spa company, they sometimes have old hot tubs you could pirate. Most of those use flexible PVC which is easier to fit.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
    		  
    #3

    Aug 5, 2013, 12:32 PM
    Hi AC

    I'd like more info. On exactly what you mean by, "automatically"?

    What are the 4 or 5 locations and what is on the end (shower heads, body sprays... tub jets)?

    How about pipe sizes on supply side and pipe size to each "location"?

    Give us as many details as you can, OK?

    Mark
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hot water pressure loss when shower used in separate apartments with separate tanks [ 2 Answers ]

Hi there, I have a 3 unit building that is a converted house. There are 3 electric hot water tanks in the basement, 1 for each unit. The tenants are complaining that when they shower and another tenant is showering, they lose the hot water. This doesn't make much sense to me as they have...

Wiring 3 wall switches in separate locations for one ceiling fan/light [ 1 Answers ]

How would I wire wall switches in 3 separate locations to control power to the celing fan/light combination? I would like to still be able to use the pull cords to activate each separately if I need to, but would like to be able to turn the lights on when I come in the room (at 3 different room...

To divert or not to divert [ 2 Answers ]

I have a twist type shower diverter and it only works in the position for the shower and not the tub spout is there a fix for this problem without replacing the diverter or do I need to replace the diverter? If the diverter needs to be replaced how hard is it to do?

Shower Divert Valve [ 1 Answers ]

Background: We have a wall-mounted shower with a diverter valve between the feed pipe and the shower head to redirect the water to a handheld shower head (principally for cleaning). The diverter is only six-years old and has a push-pull control that is becoming quite difficult to operate, and also...

Ceiling Fan Wiring for 2 separate switch locations [ 5 Answers ]

I am planning to install a ceiling fan that will have two location that will each control the fan and light. The rest of my ceiling fans have 12-2 wire providing power at the switch and a 12-3 three running from the 2-gang switch box to the fan. This should allow me to control the lights and fan...

View more questions Search