Ask Experts Questions for FREE Help !
Ask
    moe75's Avatar
    moe75 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 30, 2013, 07:30 AM
    Whirlpool estate washer
    Washer filled with water but will not start,any cycle.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Jul 31, 2013, 09:32 AM
    You will need to check the water level switch and timer input from that switch with a meter. You will need to empty machine of all water and pull off clear plastic tubing at bottom of tub and check the water level switch as you blow on tube to make sure it switches power from one output terminal to the other. It is normally closed to the water valves and closes to the terminal leading to timer when you blow on the tube. If it does not close to the terminal going to timer then you will need a new switch. It's a very common problem. Make sure to get a tight connection if you replace the switch by cutting off an inch of tubing on each end before re-attaching. Here are some manuals: https://dl.dropboxusercontent.com/u/...%20washers.zip
    https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there reset instructions for Whirlpool Estate Washer TAWS700RQ2. [ 1 Answers ]

My husband opened the lid mid cycle and the machine will not restart upon closing the lid

Whirlpool estate washer [ 1 Answers ]

Does washer model #TAWS700RQ2 have belts? Does skate plate need to be tightened down?

Whirlpool estate model taws700eq1 washer leaks [ 1 Answers ]

Hello. Our washer has a mild consistent leak toward the front of the washer. We seem to have a puddle on the floor towards the front of the machine after each cycle. Could somebody give me an idea what the problem might be and approx cost. Thanks a lot.

Whirlpool Estate washer [ 1 Answers ]

I have a Whirlpool estate heavy duty, super capacity washer that has now stopped spinning when it has large loads in it. If you have a small load it will spin entirely out, but large loads will not spin at all... I know this as I have watched with the lid open and the button depressed. Is this a...

View more questions Search