 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Find u-tube repair for sears lawn tractor model 917.254850
This model 917.254850 mower calls for deck v-belt # 130969 which is 92" long. The actual belt I removed measures about 88" on the ID and 89.375" OD. What is the correct part #? I talked to the Sears Techs and they were clueless. Help!
|
||||
Check out some similar questions!
Lever is stuck in up position. Attachment clutch lever is in correct position. Any idea what is keeping it from releasing to lower deck?
I have a sear riding mower model # 917.254850 14 hp Kohler engine model CV14s Type#PS1452 and every time I turn the key to the cranking position it blows the fuse and won't start. I have checked all the wires and none are burnt or bare. Can some one please help I know its an old tractor but it...
Engine starts a d runs about 15 minutes stall and quit running. Will only start again with full choke, Willstart again after a cool down period (30) minutes.
Blades do not disengage when I move the attachment clutch lever (there is a slack in the cable). I need to move the cutting deck up and down to get the blades to disengage. There is a lever (arm) under the Pulley, Mandrel that I can push by hand that causes the pulley to side forward and disengage...
I have a 15.5 Hp Craftsman lawn tractor. It starts fine but when you push the blade lever up to engage the blades the mower dies. Also if you let out on the brake/clutch pedel the mower stops. Note: the blade safety switch is OK and so is the clutch safety switch as is the seat safety switch. Any...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
