Ask Experts Questions for FREE Help !
Ask
Page 2 of 2 « First < 2
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #21

    Oct 24, 2008, 04:24 AM

    How about this for cutting vs. routing?

    The Dewalt&#174; Tracksaw Gives You Table Saw Precision And Panel Saw Capacity In A 12 Lb. Tool You Can Carry In One Hand. , Tracksaw W / 59 Trk, Free 46 Trk&cnctr

    Might be like 2-3 passes with the saw.
    diy er's Avatar
    diy er Posts: 1, Reputation: 1
    New Member
    		  
    #22

    Jul 23, 2013, 02:41 PM
    Just wondered how the polyurethane sealant worked out as we have the same project? What brand did you use and where did you buy it? How difficult was it to apply the sealant? Any other helpful hints?
Not your question? Ask your question View similar questions
 
Page 2 of 2 « First < 2

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Installing tongue & groove boards vertically [ 1 Answers ]

When installing tongue and groove 1 by 6 pine boards vertically on a 2x4 wall that has nothing else on it, how may nailers should I put in between the 2x4s from top to bottom to provide something to nail to? This is a regular 8 foot wall.

Where can I find tongue spacers so I don't always have to wear a flashy tongue ring? [ 9 Answers ]

I love my tongue ring but I don't always want to wear and I have to work where I can't have tongue ring. Does anyone know any common stores that have them. Because I can't find them.

Tongue Piercing, white tongue, ulcer spot? [ 3 Answers ]

Pierced it 5 days ago. Situated in front of the pierced hole, there is what appears to be an 'ulcer' type looking spot. Can anyone shed some light for me please?:(

Laminate floor tongue and grooves do not snap together [ 3 Answers ]

I am laying glueless laminate flooring in my den on top of polyethylene sheeting as a vapor barrier. I was doing well with the project until I tried to get the tongue and groove to snap together. I have been able to get the planks connected but I do not feel or hear the snap that should occur...

Moved in a few months ago, Hardwood Floor Gaps [ 1 Answers ]

Hi, I moved into a townhome style condo a few months ago. It came with hardwood floors. I really know nothing about hardwood floors so I can't really tell you much about it. I know its very thin Oak. My problem has been over the winter here. In couple of spots around the house: I have noticed...

View more questions Search