Celling wires burnted out and turn off light in other rooms

jmjohn Posts: 1, Reputation: 1

New Member

Jul 21, 2013, 09:08 AM

Celling wires burnted out and turn off light in other rooms

Celling light ficture wires are burned out could this cause other lights to go out too

stanfortyman Posts: 5,598, Reputation: 279

Electrical & Lighting Expert

Jul 21, 2013, 09:37 AM

Sure it could.
Why not tell us a bit more. What do you mean by burned out?

Add your answer here.

Check out some similar questions!

How do I connect a track light with 3 wires to a junction box with 7 wires? [ 1 Answers ]

The track light has a white wire; black wire; and a green wire The junction box has 7 wires: 1white wire and 1black wire together on one side; next to it is 1 white wire and 1 black wire together. On the other side is 1 black, 1 white, 1 red wires together A ceiling light is connected to...

Light switch will turn off under cabinet light, but won't turn light back on [ 1 Answers ]

Hi all: I recently installed under cabinet lighting in my kitchen. I added a single pole switch to an existing GFCI outlet, and then wired said switch to a surface mounted receptacle on top of my cabinets. I wired everything up, and the lights work great. The problem: When I turn...

3 black and 3 white wires... wall switch will not turn light off [ 2 Answers ]

Ceiling box has 3 black wires and 3 white wires... light will not turn off at wall switch when wired

Ceiling light fixture will not turn off - too many wires [ 10 Answers ]

I tried to install a new light fixture. The old one was elementary - one black wire and one white. The new fixture has two bulbs, so has two black and to white wires. From the ceiling box there are two white wires entwined and two black. I connected all the black wires together and all the white...

Trying to hook up a new celling fan but wires don't seem right [ 18 Answers ]

Hello, A few days ago I took down an old celling fan to find the older one was not put up right. It only was screwed to a block of wood so I removed that and put up a bar and box supported on the beams of the house. Anyway that was my first problem that I ran into the next one was the wiring . I...