Ask Experts Questions for FREE Help !
Ask
    Jsteele47's Avatar
    Jsteele47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2013, 08:09 AM
    Top fan
    Top fan won't kick in when a/c is on. Is this capacitor as I can bearly move the fan blades and fan will start. Goodman gas pack new and what and where is the capacitor look like.
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Jul 12, 2013, 07:06 PM
    If it is new, I suggest calling the installer. The unit should be under warranty.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do I remove the globe from the top of my Harbor Breeze fan? [ 2 Answers ]

I have a harbor breeze ceiling fan that has 4 lights on the bottom, but also a "globe" above the fan blades. I'm trying to get in there and clean it (lots of bugs) and replace the bulb, I cannot get into it because it has a metal cover on top of it. I know there has to be an easier way to do it...

Maytag refrigerator top freezer fan does not run? [ 1 Answers ]

Refrigerator and freezer are cold but no fan is running

I need a Shine Top LS 102 fan Switch [ 3 Answers ]

I broke my fan switch and need a replacement. The brand name is "Shine Top" model number LS-102

Blower fan motor for goodman roof top gas pack [ 1 Answers ]

I have a 2.5 Goodman Gas Pack. We have just replaced the compressor and had the coils cleaned but it still has not helped with cooling our house down. There is cool air bloing out of the vents but it has not force behind it. We have 1,300 sq ft home and we checked the blower and it does not have a...

Ceiling Fan install not right on putting deco rods to top mount [ 1 Answers ]

I have a Hampton Bay Hawthorne (Mod HD329788) ceiling fan purchased from Home Depot. Display model with all parts but no box or instruction booklet available. Upon mounting the deco rods from the uplight to the top mounting bracket we can't seem to get the right configuration to enable the...

View more questions Search