Ask Experts Questions for FREE Help !
Ask
    cyndymom's Avatar
    cyndymom Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 6, 2013, 04:33 PM
    Kenmore Elite Washer Troubleshooting F35
    What is the F35 problem?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 6, 2013, 05:06 PM
    Fill pressure switch out of range. Look on You tube for details on cleaning tube or replacing switch.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Jul 7, 2013, 08:03 AM
    It's a simple problem to solve. You may need to only re-attach the hose by cutting off the ends and fitting back on the nipples on each end. Look at this: https://dl.dropboxusercontent.com/u/...sher_Elite.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore elite washer error codes f35 [ 2 Answers ]

First the window says SUDS, then it stays on for about 15 min and says F35

Kenmore Elite Washer Troubleshooting [ 1 Answers ]

How do u fix the basket if its off balance

Kenmore elite washer troubleshooting? [ 1 Answers ]

My washer flashes a code 35 then stops working for 20 min

Kenmore washer H3 elite troubleshooting [ 0 Answers ]

H3 elite kenmore front loader washer flashing f,h during rinse/drain cycle?

What does "F35" on a Kenmore Elite Washer Mean? [ 1 Answers ]

My wife just received a new Kenmore Elite washer. There is a flashing message "F35" that continues and she cannot turn it off. What does it mean? Also, she will set the controls at what she wants to wash. It will go through the suds cycle, and then the 'F 35' comes on> What am I not doing...

View more questions Search