 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot water in mixer tap
My bathroom flow is fine, but my kitchen mixer tap has started the following... when the hot water reaches a temperature the slow slows down from full flow to a trickle, and if I turn the tap on fuller it stops flowing completely. This is often accompanied by banging.
Dcold water supply in the tap is fine, as is both hot and cold in the bathroom. Any idea what coud be causing this please? |
||||
Check out some similar questions!
Kitchen mixer tap has stopped working, everywere in the house is fine. My council said it is not priority therefore I've to wait 10 days until they"l be round to fix it Over the past few days the hot water flow has slowly been reducing, today it stopped. Could some one offer a simple solution I...
It is -13c outside not sure if that has anything to do with my problem. This morning I turned on the hot water tap and nothing. Turned on the cold got some. It's a reasonably new mixer tap. The central heating has been on all night, the shower is working and so too is the downstairs WC hot water...
No problems with tap which is a mixer in kitchen, suddenly no hot water but cold water coming out OK. Could this be a build up of lime? And how can I fix it?
Hi, I hope you could help!! Since yesterday evening I was filling up the bath with hot water and suddenly when the bath was filed a quarter of the way up, the hot water stopped. I tried turning the tap on/off position but no water was coming out at all. Although I still have cold water coming...
I have recently changed the bath and taps in my bathroom from a pair of taps to single mixer taps. Since doing this I noticed that the hot water only trickles out, the cold water is very powerful, so to fill up a nice warm bath it would take at least an hour and by then the hot water would have...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
