Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I need a take-off and print for pier and beam
[ 6 Answers ]
I worked with this old carpenter that built three of these homes each was I believe 40x40 all basic floor plan,bedroom bath,kitchen living he said the layout from floor to roof was the most efficient ,that you have very little cut off waste etc,does anyone know of this house I want to build one I...
Closet flange install
[ 2 Answers ]
Do I install the closet flange on top of the subfloor, or lay the new hardwoods, then put the flange on top of the hardwood?
Sewer smell below house on pier and beam foundation
[ 1 Answers ]
I rented out a small one bedroom to a tenant from hell. There was a sewer pipe burst and she did not inform us until after two weeks. Sewer water was all under the house and in the yard. We evicted the tenant, and the water has now dried up, but there is still an awful smell coming from under the...
Interior flooring for a pier and beam home
[ 1 Answers ]
I want to tear out the all the interior carpet and install natural wood floors throughout the house and tiles in the dining room and kitchen areas. I have been told I can not do that on a pier and beam home due to the weight of the materials and shifting of the land. What are my options? I am from...
How do I raise a beam to install?
[ 2 Answers ]
I have 2 beams that I constructed out of 3x10s (three thick and spanning 23 feet). I am using these to support my springy floor. The house is a 1970's backsplit and the space they are in is a 4 foot high crawl space with a cement floor. How do I raise these up to place the support posts under?... View more questions Search
|