Ask Experts Questions for FREE Help !
Ask
    mthsr's Avatar
    mthsr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 24, 2013, 06:54 AM
    Change brake lever on snapper rear engine mower
    How to change brake lever on 1990 snapper rear engine riding mower
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Jun 24, 2013, 07:49 AM
    Download the service manual off the internet based off the serial number range of your Snapper... use Google to find one... They are free if you look at the right results... then follow the directions.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper rear engine rider problems [ 3 Answers ]

I have an 80s era 8hp Snapper rear engine rider. The problem I'm having is that the mower bogs down terribly when attempting the cut even the most moderately thick grass. The engine seems to run just fine and the mower moves just fine. I was just wondering if there was a clutch of something for the...

Snapper rear engine mower stops running [ 3 Answers ]

I have a Snapper rear engine riding mower with a 13.5 HP engine. Runs for a short time but dies out. I've changed the fuel filter and cleaned the air filter. Seems to idle OK but after I put it in gear and run a couple of minutes it starts to die out. If I choke it, it will start and run for a...

Adjust Mower Deck of Snapper Rear Engine Rider [ 1 Answers ]

I need to raise the mower deck of my Snapper rear engine rider. It has a single blade with 30-inch cutting width. Currently, when lever is in upper-most position (#6) the blade still scalps portions of my lawn. I have looked through some online manuals but they are a bit confusing. Help...

Snapper Rear Engine Riding Mower Series 21 [ 1 Answers ]

Engine will not start, no fire, and I need to know the location of the fuse. Ted

Snapper Rear Engine Mower won't move [ 1 Answers ]

The friction wheel and drive disk are fine. How do I determine what needs replaced in the differential?

View more questions Search