Ask Experts Questions for FREE Help !
Ask
    tewcabins's Avatar
    tewcabins Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jun 11, 2013, 07:33 AM
    Loose fitting screw on type tub spout - does not leak
    I had a new one piece tub/shower and faucet /shower installed. The spout does not fit tightly and can be moved up and down as though the hole where the pipe comes through is too large. It does not leak. It is a Pfister pasadena screw on type spout. What can I do to correct this problem?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jun 11, 2013, 08:43 AM
    It is a Pfister pasadena screw on type spout.
    Does then pipe coming oiut of the wall have threads on the end? Back to you. Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Slip-on Tub Spout - Can't access set screw [ 19 Answers ]

I have been reading the posts about removing the different types of spouts. Mine is a 1/2 inch copper tube out of the wall. I can't get to the set screw. The spout will turn and with pressure come about 3/4" off the wall. I don't want to pull any harder and twist because I think I may damage...

How to change threaded tub spout to slip on type tub spout? [ 1 Answers ]

I want to change the tub spout from the thread on type to the slip on type. Does the thread on type have a thread inside the wall that I can take out and install a 1/2" copper line with MIP?

Removing a 16 year old tub spout that I can't get at the set screw. [ 1 Answers ]

There is a square hole on the underside of the spout closest to the tile wall but there is a white plastic piece blocking what I think might be the screw that needs to be undone to remove the spout. How do I get past this plastic piece? I can't seem to find any answer and need some help! Please...

Fitting a tub spout [ 5 Answers ]

I have just installed a bathtub surround. Replaced the pipes with pex, and installed a new faucet/shower, replaced the drywall and installed and caulked the new tub surround. I'm at the end and have a weird plastic attachment on the tub spout - the local "experts" at the home builders store have...

Screw won't tighten on tub spout [ 1 Answers ]

Replacing a tub spout and the screw tightens while off the pipe but won't tighten once spout is placed over pipe - this is a non-threaded pipe with a spout that has the one screw (allen wrench)

View more questions Search