Ask Experts Questions for FREE Help !
Ask
    jeromel's Avatar
    jeromel Posts: 5, Reputation: 1
    New Member
     
    #1

    Jun 10, 2013, 02:01 PM
    Flooding with Hydronic Heating Systems
    Can a "special pressure DROP differential valve" be installed at the main waterline thus safeguarding both the house and the heating system from flooding or must it be placed only in the heating system?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
     
    #2

    Jun 10, 2013, 05:29 PM
    I don't know what kind of valve you are talking about & it's purpose. Can you provide more details?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Flooding with hydronic heating systems [ 2 Answers ]

Can a burst pipe in a Hydronic heating system cause flooding until the water is shut off manually or does the system shut itself down and stop the water flow?

Bleeding hydronic baseboard heating [ 4 Answers ]

This past summer, roofers put a nail through one of the pipes of our hydronic heating system that runs in the attic to the baseboard across the room. This was repaired, and the system seems to be working fine, except for that set of baseboards now. Every other baseboard that is fed from under the...

Hydronic floor heating [ 6 Answers ]

My heating system is oil hot water, radiators. I'm remodeling a bath, can I take out the radiator and connect the feed and return to pex tubing running under the floor?

Hydronic heating pipe size [ 4 Answers ]

I wish to install a hydronic kick plate heater but it only has 1/2" inlet & outlets the zone has 3/4"pipe should I put in a bypass around the heater to keep the flow the same?

Hydronic heating system [ 2 Answers ]

I'm a licensed electrician that's been asked to hook up a 4 zone hydronic heating system which I have never worked with before. It's a mighty therm boiler model HH-PH, using RIB2041D relays 24 volt thermostat and a side wall vent. I've got all the 120 volt hook-up done and the relays hooked in...


View more questions Search