 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Please help me. I am attempting to install bifold (Jeld Wend) doors in my hallway. The floor of the closet is vinyl tile, which lays on top of a concrete slab. The hallway is carpeted. After hours of adjusting the bottom pivot and then sanding the doors, I could not get the bottom of the door...
Hi there - I would like to be a little more clear with the actual width of the opening. I know it needs to be wider than the door (single bifold in my case) but I'm not sure how much. Is a half inch total enough for the door to open without hitting? Thanks a lot
I recently put in a bifold on a laundry/closet. The opening was exact = 36". It was pretty darn hard trying to get the bifold door to fit even though the directions called for that size. It was and is very tight. Now I'm ready to do the same thing on two recently built clothes closets. The...
I am toying with the idea of installing bifold doors in an opening that presently has sliding doors. The problem is that the width of the opening is 9 feet. Four 27" doors won't work because they'll protude too far into the room when closed. Is there hardware available to hang 6 doors, 3 on each...
I'm using a small space in my house to make a small closet. There is only enough width to have a 36" door opening. I would like to use a pair of bifold doors. Each door would have two panels, each 9" wide (4 x 9" = 36"). I'm looking for the type with louvers on the top and solid on the bottom to...
View more questions Search
|
