Ask Experts Questions for FREE Help !
Ask
    Llm9601's Avatar
    Llm9601 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2013, 04:39 AM
    2000 ford ranger continuously clicking
    My 5 speed 2000 ford ranger won't start. When I turn the key I hear a continuous clicking but it will not start. Any idea what the problem is?
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Jun 2, 2013, 05:48 AM
    The battery is likely bad and you are hearing the starter solenoid chatter, due to low voltage. Remove the old battery, clean the battery terminals and cable connections, and install a new battery. It's best to have the new battery charged, prior to installation.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #3

    Jun 2, 2013, 05:56 AM
    Loose/Bad Connections could also cause this.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

92 ford ranger? [ 0 Answers ]

Can someone help me I have a 92 ford ranger xlt aircondionting nor heater works was working about a week ago and all of a sudden both stopped work fan blows hard but no heat or coolness someone please help or give me suggestions if possible have already changed out console switch didn't make a...

92 ford ranger [ 1 Answers ]

Do I need a scan tool to clear check engine light on a 92 ford ranger 2.3 liter after its been fixed or is there another trick?

92 Ford Ranger 2.3L [ 1 Answers ]

Anyone, what problems does the Check Engine light going on usually indicate? I was coming home tonight, about an hour highway drive and the light momentarily came on, then off, on and off. Not a flicker, but for several minutes at a time. Truck is VERy reliable and there is no indication that...

View more questions Search