Ask Experts Questions for FREE Help !
Ask
    grasscutter11's Avatar
    grasscutter11 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 31, 2013, 05:42 PM
    Poulin pro 16.5 h
    My poulin pro rider starts and runs fine until I engage the bade or shift to move and release clutch it just stalls out, any ideas
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    May 31, 2013, 06:40 PM
    Check your safety switchs. It could be ones is hanging up and when you try to engauge the blade it will turn off. Most modern mowers (from 10-15 years ago) had switchs to prevent the mower from being engaiged when in reverse. Too many people were turning them over when trying to back out of things.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Why does my Poulin mower stall after the clutch is disengaged [ 0 Answers ]

I bought this unit used and it worked fine but now whenever I diengaged the clutch it cuts the motor but engageded it continues to run - any suggestions it is a Poulin riding mower model 733865 MTG HD185H46A Thanks

Trailer to an upcoming(?) movie similar to Amelie Poulin [ 0 Answers ]

The trailer is a manual on how to stop your smartphone, laptop, etc from distracting you. The girl puts her electronic devices under four bowls and places the table on top of them. Then she gets a "victim" (her favourite shirt), lays it on the table and puts it in danger by filling a backing plate...

Poulin lawn tractor won't start [ 2 Answers ]

Poulin lawn tractor makes a clicking noise but will not turn over.

My new poulin 300 will cut off when I release the brake to engage mower. [ 1 Answers ]

Greeting, I just bought a Poulin Pro 300 tractor lawn mower, When I release the brake peddle it cuts off, the throttle is set to half way mark but cuts off when I raise to full throttle, what seems to be the problem? Thanks for your help, Signed: in bad need of a lawn cutting.

XP Pro cannot detect Sapphire X1650 Pro card [ 1 Answers ]

I have a three year old MB with a 1200 GB AMD Athlon 32-bit processor; 2 GB RAM, 900 GB disc space on six drives. My old video card died and I bought the AGP version of the Sapphire X1650 Pro card. The system boots and comes up running 1280 x 1024 on the monitor but the refresh is very slow, and...

View more questions Search