Ask Experts Questions for FREE Help !
Ask
    lora_b's Avatar
    lora_b Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 29, 2013, 01:11 PM
    Ducane parts--help!
    Does anyone know where I can find Ducane parts-- or substitutes for-- NH0C084AH03 and AG736031 DRC-10A (fan control center and universal relay)? My HVAC company says these are obsolete, there are no substitutes by other companies, and I need a whole new unit--this just seems impossible to me... Can anyone out there help? Thank you! Lora_B
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    May 29, 2013, 03:23 PM
    Have you tried talking to these people?

    Ducane
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ducane furnaces [ 1 Answers ]

Flame lights but goes out I have a Ducane furnace model MPGA100B4B, the furnace will light but the flame goes out after a few seconds. I have changed the igniter and it still does the same. The flame seems to go out even when the igniter is still glowing. I can hear the gas valve shut off. It...

Ducane furnace help [ 0 Answers ]

I have a Ducane furnace, model MPGA075B5. It's about 10 years old. My blower on it started running intermitantly, on 90 sec off 3 minutes or more, when I turned on my AC this year. Changed the capacitor with no improvement. The repair man said my control board was bad. I let the blower run...

Ducane HVAC [ 0 Answers ]

I have a one year old Ducane Heat Pump. The A/C seemed to work fine this summer but now that heat is required I cannot get the unit to heat except via Auxiliary heat. I upgraded the thermostat to a Honeywell programmable to no avail. When the temp drops the thermostat calls for heat but the HP...

Ducane not igniting [ 1 Answers ]

Have a Ducane furnace MPGA100B4B opened the door to inspect the wireing didn't touch anything though today it won't ignite code blinks twice witch is flame roll out switch inducer motor does cycle like normal goes through its checks than gas valve opens four 3 sec than everything turns off and the...

Ducane has to keep being reset. [ 7 Answers ]

Hello all, I have a Ducane forced air furnace. It was mfg. in 2001 and is set to propane. It has been fine for a while and we have a/c hooked up to it as well. We started noticing that it was not running... go back and look and it needs the little tiny reset button pressed and it fires up no...

View more questions Search