 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Amana 90 furnace hums won't start
My 15 years old Amana 90 furnace hums when thermostat is on heat, but won't start. Blower (fan) works fine and outside A/C is working. It’s a low hum exactly like when you start the furnace. I have cleaned the sensor. Any help would be appreciated.
|
||||
Check out some similar questions!
Arcoaire N9MP2075B12A1 hums but will not light green light on gas valve is steady green
Struggling with repair of an older, gas Whirlpool furnace model #NUGG150AK01. Have replaced relay and capacitor. Took fan out and hooked it to electric. Fan ran good this way but just hums when installed in furnce. Can you please offer advice. Thanks,
When I push the start button, it just hums and quits humming when I release the button. Belt is OK. What should I check next?
My dryer hums when I try to turn it on but will not run it just stopped when my husband checked to see if the clothes were dry that was in it. What can be wrong with it?
My Kenmore gas dryer (model number 110.74672400) hums when I press the start button (as if it will start) but that nothing happens. The dryer does not tumble or heat. Help!
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
