How to wire a t-stat for a heatpump

Check out some similar questions!

2-wire hook-up from a Carrier stat to a 3M30 Filtrete stat? [ 0 Answers ]

Ok what I have is a Carrier {edge}. Removing it to install a Filtrete 3M30. I have two wires coming from the wall. One white & one red. The back plate to the Carrier has a 4-wire hook-up. From the wall wires red go's to V White go's to Vg Then there are two wires coming from the back of the...

Wire connections from t-stat (white rodgers) to rheem heatpump 2-ton [ 1 Answers ]

I just installed a rheem 2 ton heat pump. I bought a white rodgers t-stat to run the heat pump. On the t-stat there are as follows top row of wire connectors c- common, l-? w-2-2nd stage heat, e-emergency heat, 2nd row r- 24volt hot, g-fan, o/b-reversing valve? Then y-cooling. This is a package...

Armstrong heatpump t-stat [ 1 Answers ]

I'm dealing with an armstrong heatpump, my question I would think is simple but honeyell, and the armstrong dealer couldn't answer it. The stat is made by honeywell T841A1059, however it was made specifically for armstrong, the terminal designatons are R,Y,G,O,B,W2,W3,E & X which one is the...

Wiring a rth7400 honeywell Heatpump t-stat [ 2 Answers ]

I am at my witts end with trying to wire this T-stat I am removing an old honeywell heatpump M# T874D1165 and replacing it with an RTH7400 programmable I have 7 wires running out of wall, here's what I have, BROWN and WHITE hooked to W-2 (with jumper going to Y-2) YELLOW going to...

Just 3 wire T-Stat connection, new stat, diff letters [ 6 Answers ]

Hi all, I've done tons of reading and can't find my specific wiring, tstat combo to figure it out... hopefully someone can shed some light on it for me. Natural gas forced air furnace, no air conditioning. Had a honeywell for the last 9 years, easy install, labelled easy. (but its dead) Wire...

View more questions Search

Check out some similar questions!

Add your answer here.