Ask Experts Questions for FREE Help !
Ask
    gew's Avatar
    gew Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 20, 2013, 12:10 PM
    Tub overflow on a vintage clawfoot!
    I need a connection for an overflow valve on an old clawfoot tub. I have a british lever fashioned drain kit - but it does not angle enough to match the slope of the old tub. Every part I find to fit goes immediately down at a 90 degree angle - I need a valve that will angle to fit the slope of the tub - but not drop - it needs to go out horizontally to meet the other couplings! I need slope to fit the tub - but a tube that goes out straight and does not drop! Please help!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    May 20, 2013, 04:43 PM
    Contact Clawfoot Tub Accessory Set - Tub Coasters, Overflow Cover, & Tub Caddy | ACCSET3CP
    And place your order. Good luck Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can you use sink plumbing for a clawfoot tub? [ 4 Answers ]

Hi. There is plumbing for a sink in this room. In fact there is a freestanding cabinet with sink. I want to remove the sink. Can I use this existing plumbing for a new clawfoot tub/plumbing? 1) Do I need to open the wall and/or make holes in the floor? For supply and drain? ****OR can it...

Changing diverter in clawfoot tub [ 3 Answers ]

I'm trying to fix or replace parts of my sad, old, leaky shower. I have a free standing clawfoot tub with a tub mounted faucet and diverter. See picture: http://us.f13.yahoofs.com/bc/4421a135m915b350a/bc/shared/tub.jpg?bfHOjtJBOpliepIu If pic doesn't appear try link: (photos will be my next...

Changing diverter in clawfoot tub [ 1 Answers ]

I'm trying to fix or replace parts of my sad, old, leaky shower. I have a free standing clawfoot tub with a tub mounted faucet and diverter. See picture: http://us.f13.yahoofs.com/bc/4421a135m915b350a/bc/tub.jpg?bf7katJBAizpepIu I initially tried to remove the entire facet thinking I would clean...

Clawfoot tub, re-installing feet [ 1 Answers ]

I have a claw tub and the feet came off. When I reinstall them and set the tub up under its own weight they come back off. I`ve tightened the screws as much as I possibly can. Is there any fix to this tub or process?

CPVC works to Clawfoot tub [ 1 Answers ]

I have an 100 year old house with CPVC plumbing. I am working on the tub. Water supply is a 1/2 inch cpvc pipe with a 3/4 threaded male piece on the end. Connected to that is an old valve. I have a new fixture. And a new valve that is for a 1/2 copper pipe in and a 3/8" pipe out to fixture. I want...

View more questions Search