Ask Experts Questions for FREE Help !
Ask
    tafams's Avatar
    tafams Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 20, 2013, 03:23 PM
    Carrier fan blade noise
    My carrier home unit fan blade started screeching yesterday. Hit the shaft with some WD ad this is all I had. Lasted 1 day. Now hear again. Don't want to burn up. Should I put some 3 and 1 on it or is there someplace for oil or is it going out?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    May 20, 2013, 04:39 PM
    fan blade started screeching
    Since you said fan blade, I suggest that the actual blade part has worked loose from the mounting collar.

    Suggest that you remove the fan from the motor, then peen over the clenching. In other words, put the fan on a flat surface, mounting collar down and tap around the center hole.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the part #s for my rheem a/c condenser fan motor and fan blade and fan grill [ 1 Answers ]

Hi I need to know the parts #S of my rheem a/c condenser unit for the fan motor and fan blade and fan grill? Model # is ralc-g4zjaz

What is quieter a 3 blade or a 4 blade conderser fan [ 0 Answers ]

Is a 3 blade fan quiter than a four blade

Carrier air handler fan noise [ 6 Answers ]

We had a Carrier heat pump/air handler installed in March. The installation people told us to keep the fan running all of the time to circulate air. Last night it started to make a high-pitched noise when just the fan was running, that could be heard through the registers in the house. You can't...

View more questions Search