Ask Experts Questions for FREE Help !
Ask
    bobmcduf's Avatar
    bobmcduf Posts: 1, Reputation: 1
    New Member
     
    #1

    May 18, 2013, 12:53 PM
    Honeywell thermostat wires E, O, & C no place for them
    Need to know if these wires need to be used
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
     
    #2

    May 18, 2013, 02:58 PM
    Is this a heat pump system? What color wires do you have at the stat?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Connect Honeywell Thermostat in place of old Lennox [ 2 Answers ]

I have a Lennox thermostat 67K4801 with numbers > and 3AAT89B38G1. > (Y1 G. O. R. L. T. C. W1. E.) I just purchased a Honeywell Programmabel to replace the old Lennox. The wiring instruction booklet shows all alternate wiring combination, except how to connect the T terminal. Please help! ...

Is there a honeywell touchscreen thermostat with separate O & B wires? [ 15 Answers ]

Does anyone know of a honeywell touchscreen thermostat that has six-wire compatibility (R, W, Y, G, and O and B wires)? I know there's one from White Rodgers but was wondering if anyone knew of one from honeywell?

How to connect wires to a RTH6300B honeywell thermostat [ 2 Answers ]

I only have 2 wires to connect I removed the old wires from the W and R connection And put them on the new one but nothing happens. Any help would be appreciated

Wires on honeywell thermostat T8411R [ 2 Answers ]

I was painting my wall and I decided to remove my thermostat off the mounting plate, after I finish I put it back but it didn't work anymore, so I check the wires and noticed a black wire that was loose, all the other wires were in place, so I tried to tight those but a think I accidentally touch...

Matching wires on new honeywell thermostat [ 1 Answers ]

My old thermostat was janitrol HPT 18-60 and wires were: Y (yellow) G (orange) R (Red) O (orange) W2 (white) E (Black) C (Blue) I just bought a Honeywell #RTH6300B. Their wires are: G,W,Y, R,RC. How can I match them up? Do I need the "O" on the old one? We are only getting hot air now by...


View more questions Search