 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman lt1000 won't start
Craftsman LT1000, 12 hp briggs & stratton will not start. If I try to start it the engine will not turn over, it make about a quatyer round or less and stop. If I take the starter off and turn the key the syarter spins. If I take the spark plug out and trun the key the engine turns over like it should. I am getting fire at the spark plug. I don't know if I have a weak starter, if there is such a thing or if I have other problems. It started and run great a few days ago. I also had the battery tested and they said it was good. I don't know how to test a starter and don't want to spend money on a new one if it is not the problem. Can someone please give me some advise.
|
||||
|
||||
|
Hi,
Time for the valve adjustment, be it by you(if capable) or other. See this: Lawn Mower Repair Valve Adjustment - YouTube As always, Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Here's the poop on my lawn tractor model # 917 272 672. It had been starting and running fine up to the point when I changed the mower belt in which I dropped the deck to change the belt. Once the belt was changed I reversed the process and when I tried to start it all I got was one click. The...
My LT1000 suddenly stopped moving. No forward or reverse from the hydrostatic transmission. Any suggestions where to start troubleshooting? Thanks!
Hi Everybody, I am new to post here and learning. I have a LT1000 Model 917.271842 with a 21.0hp twin B&S I/C engine model#461707. My problem is the mower will not start. It makes no noise at all, nothing, no clicking just dead. I load tested my battery and it reads fine. I fully charged it also....
I picked this up cheap. It has a 12.5hp b & s engine. Never started using the key, I always jumped the 2 pins on the solenoid to start. Did this probable 10 - 12 times, now it won't start. Lots of sparks when I jump the pins but the flywheel only spins slowly and only a turn. Pulled plug out,...
I was performing my spring maintenance on my craftsman lt1000. The lawnmower would start prior to doing the maintenance. I changed the blades, oil, oil filter, and the spark plug. Now the mower will turn over but won't spark/fire, there is gas flowing to the spark plug. Any ideas what is wrong...
View more questions Search
|
