Ask Experts Questions for FREE Help !
Ask
    RichS23145's Avatar
    RichS23145 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 10, 2013, 05:14 PM
    Pump on and off
    My challenger pump is constantly turning off. I have to go out and shake the electrical box next to it to get it to turn on. I have looked under the cover and everything seems to be properly wired/no corrosion issues. Any thoughts/suggestions? Thanks.
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
    		  
    #2

    May 10, 2013, 05:21 PM
    Hi rich and welcome, post back with more information to get a better answer. Post a picture if you can. Good luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pump lost prime and overheated motor runs but does not pump is the pump fried [ 4 Answers ]

Over night the pump lost primed and melted the sched. 40 fittings I replaced all the fittings and cannot get pump to prime the motor runs is it possible that the propeller was damaged from the heat?//

Grundfos recirc pump - ticking noise and pump warm to the touch - Normal? [ 2 Answers ]

We have an approx 8 y/old Grundfos recirc pump on our hot water line and today I notice it is making a ticking noise (first time I've noticed this) and it is "quite" warm to the touch--I've never touched it before so I'm not sure if this is always the case. Should I be worried? I don't recall that...

Does a condenser centrifugal pump suit t work asa chilled water pump [ 0 Answers ]

I have 3 cenreifugal pump which are used for the condenser cooling water recirculation, may I could use it as a chilled water pumps and get another smaller pumps for cooling water recirculation, thank u in advance.

Is Meyers pentair sewage ejector pump model SR1830 a quality pump? [ 1 Answers ]

Just installed a sewage ejector pump and I'm somewhat concerned about the manufacture. Not seeing very much information about Meyer. I see Zoeller and Little Giant, so I'm wondering if I got a quality systems. Considering all that was required to get the system in I don't want to revisit this for...

View more questions Search