How to remove hunter 528 pool leveler

Check out some similar questions!

Korky 528 anti siphon for pool auto fill [ 1 Answers ]

Hello. My pool auto-fill is a Korky 528 "anti siphon". It is fed from the hose bib going through an additional anti siphon valve. Is this second anti-siphon valve redundant? It is currently leaking and I would rather plumb it direct if I can. Thanks!

Do I need to remove the jumper between rh and rc on my hunter [ 1 Answers ]

I have a problem with mythermostat it quit working( proqramable) It will turn on the blower motor on run only and that's it. Thought the lighting storm blew it so got a Hunter and installed it with the wires the same way. They have a jumper between the rh rc connection does it have to be removed....

How to replace korky 528 in pool [ 0 Answers ]

The Korky refill valve keeps filling after it has reached and past the water level line. How can the valve be repair? If so, how. If not, how do I replace it?

Korky 528 automatic water leveler pool leak? [ 2 Answers ]

I have a korkly 528 automatic water leveler. I saw that there is a leak on the PVC pipe that house this korkly water leveler. I am not sure where does the leak come from. It appears to me that the water leveler did its job, but I am not sure why there is trace of water on the PVC pipe and this...

How do you remove cement based floor leveler [ 1 Answers ]

Am having hardwood installed and dinette floor sags in the middle. Tried Universal mix with water leveler over chipboard and now it has to be removed since its dried. Have been using chisel and hammer but its very slow going. Any suggestions?

View more questions Search

Check out some similar questions!

Add your answer here.