Ask Experts Questions for FREE Help !
Ask
    Luis-111111's Avatar
    Luis-111111 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 3, 2013, 06:13 AM
    Craftman lt 2000
    I have a craftman lt 2000 and I replace the filter and fuel line and now I'm not getting fuel from the fuel tank to the motor how do I prime it and if I put a little bit of starting fluid in the carb it does run for a second but I want to know if there's a way that's I can prime it to get my fuel from the gas tank to the motor
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    May 8, 2013, 06:17 PM
    Hi,
    If you have a fuel pump, you may have connected to lines incorrectly. There should be no need to prime. On a gravity-fed system, gravity does the work. Is your fuel shutoff solenoid opening. Usually a click can be heard when the key is turned to On.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftman lt1000 [ 1 Answers ]

I need to replace the battery on my craftsman lt1000, is it a 6 or a 12 volts and how many cca should it be?

Craftman rider [ 4 Answers ]

Stop when I try to engage deck

Early 2000's (2000-2004 range) - House Music Song [ 0 Answers ]

This song used to be popular.. I really forget how it goes but I remember I really liked it. Basically, the only identifying piece of information I can recall about this song is that it featured a female voice talking about younger people coming in to a club and asking what music it was or...

I have a craftman eager 4 [ 2 Answers ]

I took the carb. Apart plus the float to see why it was sticking. Now I can't put it back togher and I think I'm missing some part

View more questions Search