Ask Experts Questions for FREE Help !
Ask
    misskris78's Avatar
    misskris78 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 3, 2013, 08:35 AM
    Heat pump ac doesn't NOT COOLOING
    I have a 5 yr old lennox Merit series heat pump and the ac has stopped cooling the house. The heat works fine. Everything turns on, and there is some air blowing out of the vents but its weak and doesn't cool the house down. The outside lines are not hot or cold to the touch. The red and green led's flash at the same time, about every second. I'm not sure if that is considered fast or slow? Could it need refridgerent? Leaving on vacation next week and not really wanting to spend everything before we leave. I have replaced the air filter which wasn't even a month old and I cleaned the outside of the unit. Any help would be great :)

Check out some similar questions!

I have a newly installed 13 seer ruud heat pump that huruud heat pump troubleshooting [ 3 Answers ]

I have a newly installed ruud 13 seer heat pump, it works fine. It emits a constant hum,louder sometimes than others, this hum continues when machine is off, it will only cease when power is off to machine. I have heard various transformers sound similar,but should this heat pump make this...

Ruud achiever ac/ heat pump with aux heat.. electric.. pump in high pressure lockout... [ 0 Answers ]

Replaced tstat.. tech added 2 lbs r22.. but it didn't register on his gauge that he had added any... worked for a day.. didnt need heat for 3 days... then had to reset house electrical for cooling to come on... now heat cme on for 5 minutes then went into aux heat...

What to do if howell heat pump heats but doesn't cool? [ 2 Answers ]

I have a brand new unit that is not cooling. The heat pump works, so it has electricity but it is stuck on heat. Any suggestions?

I have a 4 ton rued heat pump with auxiliary gas heat pump quits working [ 1 Answers ]

I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.